CNC Router Bits - Home
Onsrud Router Bits
CNCRouterBitsXP.com is a Toolsxp.com site
Search |  Specials |  ToolsXP |  View Cart |  Checkout |  My Account |  Contact |  Links
 Onsrud Cutter
 Material Being Cut by...
 Spiral Router Bits
 Straight Router Bits
 Diamond Router Bits
 CNC Drill Bits
 Aluminum Mills
 End Mills for Exotic M...
 Engraving Bits
 Techniks

Bookmark us

MDF Cutting CNC Router Bits

CNC Router Bits: MDF Router Bits Choose Series

Buy MDF Drill Bits
ApplicationGoodBetterBest
Single Pass52-200/57-20060-300/60-35060-100
Roughing60-00060-800
Finishing60-300/60-35060-200

CNCRouterbitsXP.com offers great prices and a huge selection in various series of CNC Router Bits for cutting MDF, choose the series of MDF Router Bits for your needs. At CNCRouterBitsXP.com you'll find it fast, we'll ship it fast, all at a great price! 15% Off Onsrud Cutter Router Bits



Which Onsrud Router Bit is right for me? Which Onsrud Router Bit is right for me?



Browse these categories under "MDF Cutting CNC Router Bits"

37-50

37-50

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide V Flute Up-shear
Usage:
(SW) = Softwood
(HW) = Hardwood
(CW) = Composite Wood
(SP) = Soft Plastic
(HP) = Hard Plastic
(SSP) = Solid Surface
(LW) = Laminated and Veneer

37-60

37-60

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide V Flute Up-shear
Usage:(SW) = Softwood
(HW) = Hardwood
(CW) = Composite Wood
(SP) = Soft Plastic
(HP) = Hard Plastic
(SSP) = Solid Surface
(LW) = Laminated and Veneer

37-80

37-80

Onsrud Cutter CNC Router Bit: 2 Flute Lettering Bits V Flute
Usage: Wood
(SW) = Softwood
(HW) = Hardwood
(CW) = Composite Wood

40-50

40-50

Onsrud Cutter CNC Router Bit: 2 Flute - Carbide Tipped Straight Round & Rout
Usage:
(SW) = Softwood
(HW) = Hardwood
(CW) = Composite Wood
(SP) = Soft Plastic
(HP) = Hard Plastic
(SSP) = Solid Surface

47-00

47-00

Onsrud Cutter CNC Router Bit: Carbide Tipped Straight MDF Panel Bit
Usage: MDF
(CW) = Composite Woods

48-000 - 1 Flute

48-000 - 1 Flute

Onsrud Cutter CNC Router Bit: 1 Flute - Carbide Tipped Straight Router Bits
Usage: Natural wood, wood composites, composite plastic and foam
+ Solid Carbide
* These tools are designed and toleranced for air routers with guide bushings.

(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF
(CP) = Composite
(FP) = Foam

48-000 - 2 Flute

48-000 - 2 Flute

Onsrud Cutter CNC Router Bit: 2 Flute Carbide Tipped Straight
Usage: Natural wood, wood composites, composite plastic and foam
+ Solid Carbide
* These tools are designed and toleranced for air routers with guide bushings.
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF
(CP) = Composite
(FP) = Foam

48-700

48-700

Onsrud Cutter CNC Router Bit: Carbide Tipped Straight CNC/MDF Bit
Usage: Wood composites
(CW) = Soft Plywood Hard Plywood MDF

52-200

52-200

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Upcut Spiral Router Bits
Usage: Natural wood, wood composites, solid surface, and some plastic
Helix Angle = 30°
L = Left Hand Rotation
*Special Point

52-400

52-400

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Upcut Spiral Wood Rout
Usage: Natural wood, wood composites, plastic and solid surface
Helix Angle = 30°
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF
(SP) = Soft Plastic

52-900

52-900

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Upcut Extreme Heavy Duty Standard
Usage: Natural wood and wood composites
Helix Angle = 30°
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF
(SP) = Soft Plastic

56-200

56-200

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Straight Wood Rout
Usage: Natural wood and wood composites
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF

57-200

57-200

Onsrud Cutter CNC Router Bit: 2 Flute - Solid Carbide Downcut-Spiral Router Bits
Usage: Natural wood, wood composites and solid surface
Helix Angle = 30°
L = Left Hand Rotation
*Special Point
S=Soft Wood

57-400

57-400

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Downcut Spiral Wood Rout
Usage: Natural wood, wood composites and solid surface
Helix Angle = 30°
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF

57-900

57-900

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Downcut Extreme Heavy Duty Standard - Double Edge – designed for routing where extreme loads are placed upon the cutting tools and when extra part hold down is required
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF

60-100C

60-100C

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Chipbreaker, Finisher Compression Spiral
Usage:
Helix Angle = 30°
* Helix Angle = 20°
(HS) = Hard surface double laminate geometry.
(HW) = Hardwood geometry.
(L) = Left Rotation Tool

60-100M

60-100M

Onsrud Cutter CNC Router Bits: 1 Flute - Solid Carbide Compression-Spiral Router Bits
Usage: Double sided laminated, veneered, natural wood and wood composites
(LW) = Laminated and Veneered
(HW) = Hard Wood
(CW) = Composite Wood
(MT/DT) = Mortising and Dovetailing

60-100MW  1 Flute

60-100MW 1 Flute

Onsrud Cutter CNC Router Bit: 1 Flute Solid Carbide Max Life Compression Spiral
Usage: Double sided laminated and veneered materials
Helix Angle = 30°
*Mortise Compression
(LW) = Laminated Chipboard Laminated Plywood

60-100MW  2 Flute

60-100MW 2 Flute

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Max Life Compression Spiral
Usage: Double sided laminated and veneered materials
Helix Angle = 30°
*Mortise Compression
(LW) = Laminated Chipboard Laminated Plywood

60-100SE

60-100SE

Onsrud Cutter CNC Router Bit: 1 Flute Solid Carbide Compression Spiral
Usage:
Helix Angle = 30°
* Helix Angle = 20°
(HS) = Hard surface double laminate geometry.
(HW) = Hardwood geometry.
(L) = Left Rotation Tool

60-100TE

60-100TE

Onsrud Cutter CNC Router Bit: 3 Flute Solid Carbide Compression Spiral
Usage: Double sided laminated, veneered, natural wood and wood composites
(LW) = Laminated and Veneered
(HW) = Hard Wood
(CW) = Composite Wood
(MT/DT) = Mortising and Dovetailing

60-102m

60-102m

Onsrud Cutter CNC Router Bit: 2 Flute - Solid Carbide Compression for Mortising
Usage: Double sided laminated, veneered, natural wood and wood composites
(LW) = Laminated and Veneered
(HW) = Hard Wood
(CW) = Composite Wood
(MT/DT) = Mortising and Dovetailing

60-103M

60-103M

Onsrud Cutter CNC Router Bit: 3 Flute - Solid Carbide Compression for Mortising
Usage: Double sided laminated, veneered, natural wood and wood composites
(LW) = Laminated and Veneered
(HW) = Hard Wood
(CW) = Composite Wood
(MT/DT) = Mortising and Dovetailing

60-200

60-200

Onsrud Cutter CNC Router Bit: 3 Flute Solid Carbide Low Helix Finisher
Usage: Natural wood, plastic, composite plastic and solid surface
Helix Angle = 10°
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF
(HP) = Hard Plastic
S(SP) = Soft Plastic

60-300

60-300

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Chipbreaker Finisher
Usage: Natural wood and wood composites
Helix Angle = 30°
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF

60-350

60-350

Onsrud Cutter CNC Router Bit: 3 Flute - Solid Carbide Spiral Chipbreaker/Finisher
Usage: Natural wood and wood composites
Helix Angle = 30°
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF

60-500

60-500

Onsrud Cutter CNC Router Bit: 4 Flute - Solid Carbide Mortise Compression Spiral
Usage: Double sided laminated and veneered, natural wood and wood composites
Helix Angle = 30°
(SW) = Soft Wood
(HW) = Hard Wood
(MT) = Mortising

60-500m

60-500m

Onsrud Cutter CNC Router Bit: 4 Flute - Mortise Compression Spiral
Usage: Double sided laminated
(LW) = Laminated and Veneered
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Composite Wood
(MT/DT) = Mortising and Dovetailing

60-600

60-600

Onsrud Cutter CNC Router Bits: 4 Flute Solid Carbide High Velocity Compression Spiral
Usage: High velocity routing of double sided laminated and veneered, natural wood and wood composites.
Helix Angle = 30°
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF
(LW) = Laminated Chipboard Laminated Plywood

60-700

60-700

Onsrud Cutter CNC Router Bit: 4 Flute Solid Carbide High Velocity Upcut Spiral
Usage: High velocity routing of natural wood and wood composites
Helix Angle = 30°
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF

60-900

60-900

Onsrud Cutter CNC Router Bits 3 Flute Solid Carbide Extreme Heavy Duty Hogger
Usage: Natural wood and wood compositesHelix Angle = 30°
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF

60-950

60-950

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Extreme Heavy Duty Chipbreaker/Finisher
Usage: Natural wood and wood composites
Helix Angle = 30°
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF

61-200

61-200

Onsrud Cutter CNC Router Bit: 1 Flute Solid Carbide Straight Wood Rout
Usage: Natural wood and wood composites
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Soft Plywood Hard Plywood MDF

64-000

64-000

Onsrud Cutter CNC Router Bit: 1 Flute Solid Carbide O Flute Downcut Spiral Router Bits
Usage:
(A) = Aluminum
(SSP) = Solid Surface
(HP) = Hard Plastic
(SP) = Soft Plastic
(CW) = Composite Wood
(HW) = Hard Wood
(SW) = Soft Wood

64-800 - Downcut Spiral

64-800 - Downcut Spiral

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Rougher Downcut Spiral
Usage: wood and wood composites
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Composite Wood

65-000

65-000

Onsrud Cutter CNC Router Bit: 1 Flute Solid Carbide O Flute Upcut Spiral
Usage:
(A) = Aluminum
(SSP) = Solid Surface
(HP) = Hard Plastic
(SP) = Soft Plastic
(CW) = Composite Wood
(HW) = Hard Wood
(SW) = Soft Wood

65-800 - Upcut Spiral

65-800 - Upcut Spiral

Onsrud Cutter CNC Router Bit: 2 Flute Solid Carbide Rougher Upcut Spiral
Usage: wood and wood composites
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Composite Wood

68-000  High Helix Hogger

68-000 High Helix Hogger

Onsrud Cutter CNC Router Bit: 3 Flute Solid Carbide High Helix Hogger
Usage: Natural wood and wood composites
Helix Angle = 30

68-000  Low Helix Hogger

68-000 Low Helix Hogger

Onsrud Cutter CNC Router Bit: 3 Flute Solid Carbide Low Helix Hogger
Usage: Natural wood and wood composites
Helix Angle = 10°

68-100

68-100

Onsrud Cutter CNC Router Bit: 1 Flute - PCD Compression Tool
Usage: Composite wood
(CW) = Composite Wood

72-000 - Brad Point - Left Hand Rotation

72-000 - Brad Point - Left Hand Rotation

Onsrud Cutter CNC Router Bit: Solid Carbide Boring Bits, Brad Point, Right Hand Rotation
Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

72-000 - Brad Point - Right Hand Rotation

72-000 - Brad Point - Right Hand Rotation

Onsrud Cutter CNC Router Bit: Solid Carbide Boring Bits, Brad Point, Right Hand Rotation
Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

72-000 - Hinge Bit

72-000 - Hinge Bit

Onsrud Cutter CNC Router Bit: Solid Carbide Boring Bits, Hinge Bit
Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

72-000 - Through Hole - Left Hand Rotation

72-000 - Through Hole - Left Hand Rotation

Onsrud Cutter CNC Router Bit: Solid Carbide Boring Bits, Through Hole, Left Hand Rotation
Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

72-000 - Through Hole - Left Hand Rotation

72-000 - Through Hole - Left Hand Rotation

Onsrud Cutter CNC Router Bit: Solid Carbide Boring Bits, Through Hole, Left Hand Rotation
Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

72-000 - Through Hole - Right Hand Rotation

72-000 - Through Hole - Right Hand Rotation

Onsrud Cutter CNC Router Bit: Solid Carbide Boring Bits, Through Hole, Right Hand Rotaion Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

77-100

77-100

Onsrud Cutter CNC Router Bit: 2 Flute and 3 Flute Taper Tools
Usage: Wood, Plastic, and aluminum
(SW) = Soft Wood
(HW) = Hard Wood
(SP) = Soft Plastics
(HP) = Hard Plastics
(A) = Aluminum

CNCRouterbitsXP offers CNC Router Bits & CNC Bits, Spiral Router Bits
from Onsrud Cutter - CNC Tool Holders from Techniks
CNCRouterbitsXP.com      1-877-866-5797